38
Fig. 55
Drip-feed lubricator
The drip-feed lubricator must be set so that a drop
falls through the inspection glass every three sec-
onds.
5.3
Cross auger / feed
Fig. 56
Cross auger
The cross augers are fitted with fitting irons (B) in the
area of the channel opening. Optionally available
transport claws (K) for the transport of the harvest
can be fitted here.
The number of the claws (K) or their width can differ
according to the model of picker and depend on the
feeder channel width of the respective harvester.
It is important that the transport claws are only fitted
in front of the channel opening.
Fig. 57
Auger drive up to 8 picking rows
The auger drive is performed from the opposite side
to the main drive. The rotation speed is dependant
on the main shaft of the picker and is thus preset.
Subject the chain tension to regular checks. Tighten
if necessary using the sprocket (S).
Oil the chain regularly.
Clean the protection box from time to time
Never operate the cornheader without all
the protective equipment fitted and
closed.
B
K
S
