28
Fig. 29
Adjusting the snapping plate of the fixed corn-
header
The clearance of the snapping plates can be set
(infinitely-variable) from the driver’s cab via the dou-
ble-acting cylinders.
If the snapping plates are to be readjusted, first bring
the hydraulic adjustment into the most tight-fitting
position possible. Then check the conical position of
the snapping plates (Setting, see Fig. 27)
Set an even snapping plate clearance via the ad-
justment lever (H) if necessary.
Setting the speed of the snapping plates.
The throttle valve (A) can be used to set the speed
of the snapping plate adjustment.
-
Turn in slowly
-
Turn out faster
H
