Ziatech Corporation ZT 8954 Hardware User Manual Download Page 48

Page: 48 / 50

C. Customer Support

Once you have an RMA number, follow these steps to return your product to Ziatech:

1. Contact Ziatech for pricing if the warranty expired.

2. Supply a purchase order number for invoicing the repair if the warranty expired.

3. Pack the board in anti-static material and ship in a sturdy cardboard box with

enough packing material to adequately cushion it.

Note:

Any product returned to Ziatech improperly packed will immediately void the

warranty for that particular product!

4. Mark the RMA number clearly on the outside of the box.

ZIATECH WARRANTY

Warranty information for Ziatech products is available at Ziatech’s website, located at

http://www.ziatech.com

TRADEMARKS

EISA is a registered trademark of BCPR Services, Inc.

IBM PC/AT, PS/2, and MCA are registered trademarks of International Business
Machines, Inc.

STD 32 is a registered trademark of Ziatech Corporation. STD 32 STAR SYSTEM is a
trademark of Ziatech Corporation.

All other brand and product names may be trademarks or registered trademarks of their
respective holders.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for ZT 8954



















































Search results

Summary of Contents for ZT 8954

Reviews:

Related manuals for ZT 8954

Brands by name

Popular brands

Ziatech Corporation ZT 8954, Hardware User Manual

Search results

Summary of Contents for ZT 8954

Reviews:

Related manuals for ZT 8954

Brands by name

Popular brands