60
Installation and Operating Instructions
V03
If you use the standard VDE-AR-N 4105, please refer to the information
below !
• If a central NS protection device is used, then the value of the voltage
protection U>1.1Un in the integrated NS protection can be changed with
a password.
• The displacement factor cos(phi) value is not necessary to be
adjustable if the power generation system
Σ
SAmax≤3.68KVA and
was set to 1 as default in the embedded inverter software. However,
if the power generation system is such that 3.68KVA
<
Σ
SAmax≤13.8KVA, the standard cos(phi) characteristic curve defined
in VDE-AR-N 4105 shall be applied t
hrough the ZeverCom/ZeverManager.
