16
Installation and Operating Instructions
V03
4.3 Mounting the inverter with the wall bracket
Mounting procedures:
1.
Use the wall bracket as a drilling template and
mark the positions of the drill holes, Drill 2
holes required using a drill with 10 mm bit. The
holes must be about 70 mm deep. Keep the drill
vertical to the wall, and hold the drill steady to
avoid tilted holes.
2.
After drilling holes in the wall, place two screw anchors into the holes, then attach
the wall mounting bracket to the wall using the self-tapping screws and washers
delivered with the inverter.
Risk of injury due to the inverter falls down
•Before inserting the wall anchors, measure the depth and distance of the
holes.
•If the measured values do not meet the hole requirements, redrill the holes.
Risk of injury due to the heavy weight of the inverter
•When mounting, take into account that the inverter weighs approx. 7.5kg.
