30
Installation and Operating Instructions
V03
3.
Press the clamping bracket down until it audibly snaps into place.
4.
Ensure that the cable is correctly positioned:
Result
Measure
If the stranded wires are visible in the
chamber of the clamping bracket, the
cable is correctly positioned.
• Proceed to step 5.
If the stranded wires are not visible in
the chamber, the cable is not
correctly positioned.
• Release the clamping bracket. To do so,
insert a flat-blade screwdriver (blade
width: 3.5 mm) into the clamping bracket
and lever it open.
• Remove the cable and go back to step 2.
5.
Push the swivel nut up to the thread and tighten (torque: 2 Nm).
