Smart Connect
Single Loop Touch Screen Panel
Doc: GLT-229-7-1
15
Issue: 3
Date: 12/05/2017
3.5 CONTROLS
The panel contains the following mandatory controls. They can only be operated when the user or engineer (ADMIN) password has
been entered. The CONTROLS ACTIVE LED indicates that the controls have been enabled.
This control
can be used by authorised personnel to start the sounders.
This control
can be used by authorised personnel to stop or silence the sounders whilst the panel is in the
fire alarm condition.
This control
silences the panel’s internal buzzer which is always activated when a fire or a fault has been
detected.
After an alarm has been fully investigated and dealt with, operating this control
resets the fire alarm
condition. The same control is used to reset from a fault condition.
It is good practice to stop the sounders before resetting the panel. However, pressing the RESET control whilst the sounders are still
active will silence the sounders as well as resetting the fire alarm condition.
OTHER CONTROLS
Other controls are through virtual buttons on the panel`s touch screen display. They include, amongst others, alpha and numeric
key pads, cursors for table navigation and accept & cancel buttons for system changes
