Zero 88 SIRIUS 250, Operator'S Manual

Page: 81 / 119

If the DMX address is not
accepted, a warning appears.
**ERROR WARNING**
DMX Address Already
Allocated
Press [ to Continue
Press the [ key to continue. The
Memory Display reverts to:
Set-up Fix: 1 Dup 1
Mac 600 Mod DMX _
Enter DMX Address
& Press Program
Enter the correct DMX address.
8 Enter the DMX address for the
second duplicate. Press the
PROGRAM button.
Continue entering DMX addresses
for any remaining duplicates of the
fixture.
9 When the PROGRAM button is
pressed for the last duplicate, the
Memory Display shows:
Finished Adding
Duplicates?
Press [ to Return
or { to Edit
Press the [ key to return to:
Set-Up Fix: 1
Use [ to Finish
} to Set Controls
] to Add Duplicates
10 Press the [ key to select another
fixture.
NOTE
Duplicates
Duplicates can be set up at the same time
as the primary instance of a fixture. The
instructions are detailed separately for ease
of reference.
MONITOR NOTES
:
Fixtures
A list of fixtures together with their
start addresses is shown on the
monitor.
:
Duplicates
Where duplicates have been defined
the Monitor displays show the DMX
address for the original and duplicate
fixtures.
/p5-14/3
Continuing After Setting the DMX
Address
1 When all fixtures have their DMX
addresses set up and their pan
and tilt controls the right way
round, press the [ key to return to
the Assign Fixtures menu.
2 Press the } key to move to
Auxiliary Control.
n
Figure 5-13: Duplicate Fixtures screen
5
SetUp: Desk SetUp
5 - 14
7364000/p5-14/3