Zero 88 SIRIUS 250, Operator'S Manual

Page: 72 / 119

SetUp: Illumination
SetUp: Illumination
The next stage is to adjust the setting
of the desk lamp brightness, LED
Brightness, LCD backlight brightness
and contrast.
Move to Set-Up: Illumination, as
described in the section on Selecting
Set-Up Options on page 5-3, the
Memory display shows
Set-Up
ILLUMINATION []
Select Option &
Press }
1 Use the } key to move to Desk
Lamp Brightness. The index finger
wheel now controls the Brightness
of the desk lamps. The level of the
lamps is shown in the window.
2 Use the } key to move to LED
Brightness. The index finger wheel
now controls the Brightness of the
lights (LEDS) on the desk. The
level of the lights is shown in the
window (NOT Output Lights).
3 Use the } key to move to Memory
LCD. The index finger wheel
controls the Brightness of the
backlighting on the Memory
Display, and the middle finger
wheel controls the contrast of the
LCD. These should be adjusted to
give the clearest image in the
Display in the prevailing conditions.
4 Use the } key to move to Wheel
LCD (Wheel Display). These
should be adjusted in the same
way as for the Memory Display.
5 Press the } key once to return to
Desk Lamp Brightness.
6 Press the { key to exit to Set-Up.
Set-Up
ILLUMINATION []
Select Option &
Press }
/p5-5/3
n
Figure 5-2: Set-Up: Illumination screen
n
Figure 5-3: Control Wheel Layout
Thumb Index Middle Third
finger finger finger
5
SetUp: Illumination
7364000/p5-5/3
5 - 5