Zero 88 SIRIUS 250, Operator'S Manual

Page: 78 / 119

Setting the DMX Address and
Controls
1 Move down to Set DMX and
Controls. The Memory Display
shows:
Assign Fixtures
Set DMX & Controls
Press ] to setup DMX
or } for Auxiliary
Press the ] key to open the
Fixture Assignment window again.
Desk channel 1 is highlighted.
2 Use the { and } keys or channel
flash buttons to select a fixture to
view the current fixture type and
DMX start address.
Set DMX: Fixt: 1 {}
Cyberlight Mode 1
DMX Address: 200
Press ] to assign
3 Press the ] key to modify the
current settings and set the DMX
address.
Set-Up Fix 1 DMX
Start Address = 200
Enter DMX Address
and Press Program
/p5-11/3
See Figure 5-10.
Enter the new DMX Start Address
using the channel flash buttons,or
the external keyboard. Any current
value will be overtyped
automatically.
Press Program to save the DMX
address.
If the DMX address entered cannot
be used or overlaps with that of
another fixture, a warning appears:
**ERROR WARNING**
DMX Address
DMX Channels Overlap
Press [ to Continue
4 Press the [ key and enter a Valid
DMX address and press Program.
Having successfully entered a
valid DMX address the Enter Info
window is displayed
5 Enter a description using the
channel flash buttons or the
external keyboard.
6 Press the } key.
Set-Up Fix: 1
Use [ to Finish
} to Set Controls
] to Add Duplicates
7 Press the [ key to finish, the }
key to set the controls (see the
following section on Setting Fixture
Controls), or the ] key to add
duplicates (see the section on
Duplicates on page 5-13).
NOTE
DMX Address
If a DMX address is entered that causes a
conflict with another fixture, the desk warns
the operator. Either the one being worked
on can be changed, or the one conflicted
with de-allocated and a different DMX
address allocated to that fixture.
MONITOR NOTES
:
DMX Address
When setting the DMX address, a
‘map’ is shown giving the current
status of all the 512 DMX channels.
n
Figure 5-10: Set DMX Address
5
SetUp: Desk SetUp
7364000/p5-11/3
5 - 11