Master Controls
These controls set the general operating
conditions for the entire desk. The Master
functions determine the mode of operation, the
functions of the buttons throughout the desk, and
the maximum output level for any channel.
p5/4
Master Controls
ON/OFF SWITCH:
Supplies power to the desk (Back panel).
MODE SWITCH:
A rotary switch which selects Preset, Run,
Program, Patch DMX, MIDI Set-up Out, or MIDI
Set-up In / Slave modes of operation.
GRAND MASTER:
Sets maximum level for all outputs.
FLASH FUNCTION:
Determines the function of flash buttons (see
notes).
MASTER A / B
Sets maximum level for Preset A, Preset B /
Memory Masters.
NOTES
*
Flash Functions:
Off: Flash Buttons do not function
Flash: Pressing a Flash Button will cause the channel,
memory or effect to be mixed in to the current outputs.
Solo: Pressing a flash button will cause the channel, memory
or effect to be output with all other outputs suppressed.
Preview (Run and Program Only): Pressing a flash button will
display the contents of that memory on the preview leds
without affecting the output of the desk.
*
Mode Switch
When switching from Run Mode to Preset Mode there is a
small delay, before going into Preset Mode. So if you switch
into Presets Mode by accident you can go back into Run
Mode and not need to set up Pages and Patterns etc.
Switching from Presets to Run after the delay resets the
Effects and Memory Page to 1.
Master Controls
7359700/p5/4
Page 5
