Super User Operation
Introduction
The Lightmaster XLS desk has a range of options
which are accessed in Super User mode.
Whilst in Super User, Presets A and B work
normally; Memory, Sequence and Midi functions
are disabled.
The principal options are:
Memory Card Storage
Set individual channels for Strobe operation
Set individual channels for Full Level
operation
Setting 1990 DMX / original DMX
Setting DMX for 96 or 512 channels
Inverting Master B fader
Clearing all the memories
Resetting DMX, Midi and channel settings
To access Super User:
1
Turn Mode switch to Preset.
2
Press and hold down the Memory Page + and
- buttons together, then turn the Mode switch
to Run; release both buttons.
The Memory Page display shows SU; the
Step No display shows the software version
number.
To exit Super User:
Turn Mode switch back to Preset.
Memory Card Storage
The Zero 88 Memory Card may be inserted at
any time in the slot at the back of the desk in the
middle.
The Card will store all the memories of a
Lightmaster XLS. It should NOT be left in the
desk when the desk is switched off as there is a
risk that the battery in the card will run down
more quickly.
The same card is used for the Sirius 24, Sirius 48
and Lightmaster XL but the information stored is
NOT interchangeable.
.
Super User Operation Diagram
Super User
Step No Display shows Program Version e.g. 0.6.
Dump
Dumps all Desk contents TO the Memory Card.
Load
Loads all Desk contents FROM the Memory Card.
Compare
Compares all Desk contents with those on a Memory Card.
Strobe
Select Strobe outputs by pressing channel flash buttons preview
lights indicate selection.
Full
Sets channel for Full Level (Switch) outputs by pressing channel
flash buttons preview lights indicate selection.
4 / 8 microseconds
1986 DMX break time (4 microseconds) 1990 DMX break time (8 microseconds)
Extended
Extends DMX from 96 to 512 channels. See note.
Fast DMX
Set to fast DMX as default
See note
Split Dipless
I
nverts Preset B Master fader in all modes. See note.
Clear
Clears Memory except Midi, DMX Patch and Flash/Strobe channel settings.
Reset
Resets Midi, DMX Patch and Flash / Strobe channel settings to their factory defaults.
Notes
Press Page + for
or Page - for
Press Go for
or
p20/4
Super User Operation
Page 20
7359700/p20/4
