ZEP SYSTEM I INSTALLATION MANUAL
Copyright © 2012 Zep Solar, Inc.
PAGE 27 OF 50
4.10 - STEP 10: Wire Clips
10-A: Place the Wire Clip in the module groove.
Set the Wire Clip in the module groove.
Ensure that the Wire Clip is sitting
flush with the bottom of the module
groove.
10-B: Press the Wire Clip into place.
Push the thumb tab inward until it
clips into the module groove.
10-C: Connect wires and adjust tension.
Lay wires in the wire basket portion of
the Wire Clip or press into wire reten-
tion feature.
To adjust wire tension, squeeze the
Wire Clip and slide it along the module
groove.
1
2
1
2
Summary of Contents for Zep System I
Page 1: ...VERSION 1 4 ...
