ZEP SYSTEM I INSTALLATION MANUAL
Copyright © 2012 Zep Solar, Inc.
PAGE 40 OF 50
Leveling Cam Feet
Removing Cam Feet
Level Cam Feet with a #30 Torx bit inserted into the Zep Tool.
Insert the #30 Torx bit into the handle
end of the Zep Tool.
Engage the Torx bit with the adjust-
ment screw inside the Cam Foot.
Rotate the Zep Tool CW or CCW as
needed to raise/lower the Cam Foot.
Engage the Zep Tool with the Cam Foot to be removed.
Slide the Rockit end of the Zep Tool
sideways over the Cam Foot as shown
here.
Rock Cam Foot out of Module Groove.
Rotate the Zep Tool up to rock the Cam
Foot free of the module groove.
1
2
Summary of Contents for Zep System I
Page 1: ...VERSION 1 4 ...
