ZEP SYSTEM I INSTALLATION MANUAL
Copyright © 2012 Zep Solar, Inc.
PAGE 32 OF 50
SVC-D: Remove the first module.
Pull module back and rotate up 15
degrees, then rotate module up and
out of the array.
SVC-E: Remove Interlock(s) from the next row of modules.
Rotate both fasteners to Position #1
using Flat Tool as shown.
SVC-F: Disengage the Interlocks using the Flat Tool.
Use the Flat Tool to lever the Interlock
lug out of the module groove.
Slide the Interlock clear of the mod-
ules.
You may need to tap the Interlock with
a rubber mallet to free it from the
module.
15°
1
2
Summary of Contents for Zep System I
Page 1: ...VERSION 1 4 ...
