ZEP SYSTEM I INSTALLATION MANUAL
Copyright © 2012 Zep Solar, Inc.
PAGE 20 OF 50
4-D: Place the Array Skirt onto the Cam Feet.
The Key side of the Cam Feet must
engage with the groove in the Array
Skirt.
If using a Hybrid Interlock, align the
Array Skirt with the center mark. (See
Section 5.1)
4-E: Rotate the Array Skirt into place.
You will feel a snap when the Array
Skirt is properly installed.
4-F: Insert Jams into the Cam Feet.
Place one Jam in each front row Cam
Foot.
Note: When using the Array Skirt as a temporary installation jig, proceed to install the first row of
modules. To remove the Array Skirt, remove the Jams then use the Flat Tool to uninstall the Interlocks
between the modules and the Array Skirt. Reinstall the Interlocks into the module groove key side first
per 6-B and 6-C on Page 23.
Summary of Contents for Zep System I
Page 1: ...VERSION 1 4 ...
