Z 45/75-90/110
Before installation
17
www.zepro.com
3.4
Rear beam cut-outs
It is often necessary to create cut outs in the rear beam to provide space for the platform arms when the platform
is in the uppermost position. The size of the cut outs depends on the calculated installed dimension “A”, see
illustration below.
1. Measure out and mark the location and depth of the cut-outs on the rear beam. Centre the two rear beam
cut-outs, i.e. the cut-outs must be equidistant from the centre point of the beam.
2. Cut out along the markings.
3. Remove any burrs and sharp edges.
Image 11. Z-45-110, Z-75-110, Z-45-90, Z-75-90
ZU-45-110, ZU-75-110, ZU-45-90, ZU-75-90
Image 12. ZL-45-90, ZL-75-90, ZL-45-110, ZL-75-110
ZLU-45-90, ZLU-75-90, ZLU-45-110, ZLU-75-110
Image 13. ZN-45-90, ZN-75-90, ZN-45-110, ZN-75-110
ZNU-45-90, ZNU-75-90, ZNU-45-110, ZNU-75-110
750
155
A
max
155
1060
155
A
max
155
380
155
A
max
155
Summary of Contents for Z 45-90
Page 2: ......
