Zepro Z 45-90, Installation Instructions Manual

Page: 47 / 68

Z 45/75-90/110 Connection
47 www.zepro.com
6.5 Connecting the controller to the TLC-B1 relay card
The connection of warning lights and the most commonly occurring controller (CD (Control Device)) models
are shown below. Possible controller models vary depending on lift model, configuration and relevant market.
m
WARNING!
Make sure that the control card is disconnected from the power before connecting. Connecting more
than one controller to each connection is not permitted. Risk of physical damage.
WL1 U7 U6 U5 U5 U4 U4 U3 U2 U1 U0
+ +
U0 +
+
U1 U2 U3
WL2
PA+
S5
S1+
S4
S3
S2
S1
S5+
S4+
S3+
S2+
PA-
CS
CS+
Down
2H
Out
Down
Down
C1+
C1+
Up
Tilt
In
C2+
Up
Tilt
C3+
Up
Ctrl 3
Ctrl 2
Ctrl 1
CD4
Up
Tilt
2H
Down
CD9
Up
Tilt
Down
CD10
Up
Down
CD14
Up S Down
Up
Tilt
Down
2H
CD1
CD15
Up
Down
Tilt up
Tilt down
2H
1 2 3
4
CD11
Black C1+
White ( )*
Brown Up
Yellow Down
Blue Tilt
Green 2H
Black C2+
White ( )*
Brown Up
Yellow Down
Blue Tilt
Black C3+
White ( )*
Brown Up
Yellow Down
Black C1+
White ( )
Brown Up
Yellow Down
Blue Tilt
Black C1+
White ( )
Brown Up
Yellow Down
Blue Tilt
Pink 2H
* applies to controllers with heating only
Black C1+
Blue 2H
Black C2+
White ( )
Brown Up
Blue Tilt
Yellow Down
Grey Not used
For connection of foot controls and warning
lights, see electrical diagram in Section
6.6
.