Z 2500-130/150
20
Installation
www.zepro.com
6.3
Control devices
If the vehicle is equipped with two-handed grip this
means that the operator must use both hands to be
able to operate the loading platform, while this protects
the operator from pinch point injuries.
1. Fit the control devices in the desired locations.
They must be positioned so that the operator is in
the safest possible location and has a clear view
of the load, the tail lift and the surrounding area.
2. The distance between the vehicle’s rear edge
and the centre of the controllers must be 300-
600 mm. The distance between the controllers
must be at least 260 mm. See illustration 23.
All cable inlets must be pointing downwards.
NOTE.
3. The control device’s cable is connected to the
control card.
Image 19. Installing control de-
vice with two-handed grip.
A controller must always be fitted on the side that
is facing away from traffic in motion. If there is a
need for a controller on the opposite side, a fur-
ther controller must therefore be fitted. Fitting on
the other side involves increased risk of injury.
m
WARNING!
Image 20. Installing control device
Min. 260 mm.
300 - 600 mm.
Summary of Contents for Z 2500-130 DA
Page 2: ......
Page 77: ...Z 2500 130 150 Specifications 77 www zepro com Image 92 Loading diagram 18 4 Loading diagram...
Page 79: ......
