Zepro Z 10, Installation Instructions Manual, Page: 49 / 57

Z 10/15/20 Testing and verification
49 www.zepro.com
11.2 Dynamic load test.
11.2.1 Test with max. load
• Place a test load on the platform according to the table (for the respective tail lift model/lifting capacity).
• Check that the lift operates correctly in the normal range of movement, i.e. up, down, tilting at ground
level and tilting at vehicle floor level.
11.2.2 Test with overload
• Place a test load on the platform according to the table (for the respective tail lift model/lifting capacity).
• The test load should be 1.25 x max. load for each lift model. Verify that the tail lift cannot lift the load
when the up function is switched on (it may however be possible to tilt up the load).
11.2.3 Dynamic load (Test load 1.0 x tail lift loading capacity).
For tail lifts with load centre of 600 mm.
Capacity Load 500 kg Load 1000 kg
Distance on platform (L)
450 kg 600 mm -
500 kg 600 mm -
700 kg 800 mm -
750 kg 900 mm -
1000 kg 1200 mm 600 mm
1500 kg 1800 mm 900 mm
2000 kg 1200 mm
2500 kg 1500 mm
1.1.1 Dynamic load (Test load 1.0 x tail lift loading capacity).
For tail lifts with load centre of 750 mm.
Capacity Load 1500 kg Load 2000 kg
Distance on platform (L)
1000 kg 750 mm -
1500 kg 1125 mm 750 mm
2000 kg 1500 mm 1000 mm
2500 kg 1875 mm 1250 mm