24
11. Trimmer Potentiometer (VR8): The trim pot will be used to set the “articulation” of the right hand
sensor (see the Reference Manual for details). Place the blue trim pot in its place on the board as
in the picture. Bend the leads on the back and solder them in place. Clip the leads.
62
63
12. Potentiometers (VR1 - VR7):
a. Install the pots. Make sure they are all seated securely and flush against the PCB; otherwise
the completed board won’t fit properly into your Altura’s case (64,65). Double check that the
shafts of the pots are all standing at 90 degrees to the board (66).
64
65
66
67
