38
d. Push two pins down through the two pinholes in the label, and pass them through the
corresponding holes in the card stock (27a,27b).
27a
27b
e. With the label backing still in place, neatly settle the label onto the card stock. Securely hold
down one end of the label with binder clips (29). Remove the pins.
f. Remove the backing from the free end of the label (30). Cut off about half of the backing,
and stick that half of the label down (31). Work from the center towards the end, carefully
smoothing the label to avoid air bubbles.
28
29
30
31
