37
10. Fold and glue the hems. The four tabs C & H are hems, meaning they are to be folded over flat
and glued down. Pre-crease them sharply (21), burnishing the fold with your butter knife. Apply
rubber cement, following directions on the jar for the strongest bond (22). Fold the tabs flat and
burnish again (23). If you have any trouble keeping these hems glued down tight, clamp them
with binder clips. Now leave it alone until the glue dries thoroughly.
21
22
23
24
11. Apply the labels.
a. Clean up any dust or stray paper bits from your workspace.
b. Cut out the main control panel label, around the outside of the white borders (25).
c. Poke pinholes through the label at the crosshairs for the far left and right pots. Be very
precise! (26).
25
26
