© 2013/EN Zep Solar, Inc. reserves the right to make specifications changes without any prior notice. All rights reserved.
www.zepsolar.com
Document #800-0329-001 Rev F
File Generated July 3, 2013
Page 59
ZS SPAN INSTALLATION MANUAL FOR RAIL-BASED APPLICATIONS - U.S.
Special Inset: Installing Side Skirt and Corner Caps
Installers have the option of attach-
ing the Array Skirt and Corner Caps
to the sides of a completed array for
an enhanced visual appearance.
for information on various configura-
tions achievable with ZS Span.
Engage one side of the T-Lock head with
the Zep Groove (
i
). Then snap the Array
Skirt onto the T-Lock from the other side
(
ii
).
Notes:
Use two T-Locks per Array Skirt section.
If using a Universal Box Bracket or other PV
electronic device that attaches directly to a
module’s Zep Groove, omit one section of
perimeter Array Skirt or cut Array Skirt as
needed.
Front of array
Corner Cap
Side of array
Press down (
iii
) and then inwards (
iv
) on the tail of the T-Lock to fully
secure the Array Skirt.
Installing the Side Skirt Using the T-Lock
T-Lock
Head
Tail
i
ii
iii
iv
Cross section
