Zennio KLIC-SG, User Manual

Page: 37 / 40

KLIC-SG
http://www.zennio.com Technical Support: http://support.zennio.com
37
0x8 (Stop)
0xD (Inc. by 100%)
...
0xF (Inc. by 1%)
4 Bit C - - T - DPT_Control_Dimming
0x0 (Stop)
0x1 (Dec. by 100%)
...
0x7 (Dec. by 1%)
0x8 (Stop)
0xD (Inc. by 100%)
...
0xF (Inc. by 1%)
[Ix] [Long Press] Brighter/Darker
Long Pr. -> Brighter/Darker;
Release -> Stop
1 Bit C - - T - DPT_Switch 0/1 [Ix] [Long Press] Light On Sending of 1 (On)
1 Bit C - - T - DPT_Switch 0/1 [Ix] [Long Press] Light Off Sending of 0 (Off)
1 Bit I C - W T - DPT_Switch 0/1 [Ix] [Long Press] Light On/Off Switching 0/1
1 Byte C - - T - DPT_SceneControl 0-63; 128-191 [Ix] [Long Press] Run Scene Sending of 0 - 63
1 Byte C - - T - DPT_SceneControl 0-63; 128-191 [Ix] [Long Press] Save Scene Sending of 128 - 191
1 Bit O C R - T - DPT_Alarm 0/1
[Ix] [Switch/Sensor] Alarm: Breakdown
or Sabotage
1 = Alarm; 0 = No Alarm
2 Bytes C - - T - 9.xxx
-671088.64 -
670433.28
[Ix] [Long Press] Constant Value (Float) Float Value
2 Bytes C - - T - DPT_Value_2_Ucount 0 - 65535
[Ix] [Long Press] Constant Value
(Integer)
0 - 65535
1 Byte C - - T - DPT_Scaling 0% - 100%
[Ix] [Long Press] Constant Value
(Percentage)
0% - 100%
1 Byte C - - T - DPT_Value_1_Ucount 0 - 255
[Ix] [Long Press] Constant Value
(Integer)
0 - 255
75, 81 1 Bit C - - T - DPT_Trigger 0/1 [Ix] [Long Press/Release] Stop Shutter Release -> Stop Shutter
76, 82
1 Byte I C - W - - DPT_Scaling 0% - 100%
[Ix] [Long Press] Dimming Status
(Input)
0% - 100%
1 Byte I C - W - - DPT_Scaling 0% - 100% [Ix] [Long Press] Shutter Status (Input) 0% = Top; 100% = Bottom
83 1 Byte I C - W - - DPT_SceneNumber 0 - 63 [Motion Detector] Scene Input Scene Value
84 1 Byte C - - T - DPT_SceneControl 0-63; 128-191 [Motion Detector] Scene Output Scene Value
85, 114 1 Byte O C R - T - DPT_Scaling 0% - 100% [Ix] Luminosity 0-100%
86, 115 1 Bit O C R - T - DPT_Alarm 0/1 [Ix] Open Circuit Error 0 = No Error; 1 = Open Circuit Error
87, 116 1 Bit O C R - T - DPT_Alarm 0/1 [Ix] Short Circuit Error
0 = No Error; 1 = Short Circuit
Error
88, 117 1 Byte O C R - T - DPT_Scaling 0% - 100% [Ix] Presence State (Scaling) 0-100%
89, 118 1 Byte O C R - T - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
[Ix] Presence State (HVAC)
Auto, Comfort, Standby, Economy,
Building Protection