KLIC-SG
Technical Support:
26
2.2.4
SCENES
The Scenes function allows defining a set of statuses (in terms of On/Off, mode, fan
speed, etc.) that KLIC-SG will send to the A/C unit whenever it receives the
corresponding scene values from the KNX bus.
ETS PARAMETRISATION
After enabling this function (see section 2.2.1), a new tab named
Scenes
will be
incorporated to the tab tree. It allows setting up different scenes (up to 5), consisting
each of them in a set of orders to be sent to the A/C unit upon the reception, through the
KNX bus and by means of the Scenes object, of the corresponding scene value
(decreased by 1, according to the KNX standard).
Figure 20.
A/C Gateway. Scenes.
For every enabled scene, the particular parameters that should be configured are:
