KLIC-SG
Technical Support:
18
INITIAL CONFIGURATION
Figure 12.
A/C Gateway. Configuration. Initial Configuration.
Initial Configuration
:
allows setting the desired initial state that KLIC-SG will
send the A/C unit after programming or restarting the device:
[
Default
]: the initial state will be the last one KLIC-SG is aware of.
[
Custom
]: see section 2.2.3.
SCENES
Figure 13.
A/C Gateway. Configuration. Scenes.
Scenes
[
disabled
/enabled
]
:
allows setting up different scenes (up to 5),
consisting each of them in a set of orders to be sent to the A/C unit upon the
reception of scene trigger values through the KNX bus. See section 2.2.4.
OPERATING TIME
Figure 14.
A/C Gateway. Configuration. Operating Time.
The operating time of the A/A machine in hours and/or seconds can be known.
The available parameters in ETS are:
