ALLinBOX 161
/ 88 / 46 / Hospitality
Technical Support:
27
ETS PARAMETERISATION
Once the Master Light function has been enabled, a specific tab will be included in the
menu on the left. This new parameter screen (Figure 13) contains the following options:
Figure 13.
Master Light
Number of State Objects
[
1
…12
]: defines the number of 1-bit status objects
required. These objects are called “
[ML] Status Object n
”.
In addition, the general status object (“
[ML] General status
”) will always be
available in the project topology. It will be sent to the bus with a value of “1”
whenever there is at least one of the above state objects with such value.
Otherwise (i.e., if none of them has a value of “1”), it will be sent with a value of
“0”.
Trigger Value
[
0 / 1 /
0/1
]: sets the value that will trigger, when received
through “
[ML] Trigger
”, the master action (the general switch-off or the
courtesy switch-on).
General Switch-Off
.
➢
Delay
[
0
…255
] [
x 1 s
]: defines a certain delay (once the trigger has been
received) before the execution of the general switch-off.
➢
Binary Value
[
disabled/
enabled
]
: if checked, object “
[ML] General Switch-
off: Binary Object
” will be enabled, which will send one “0” whenever the
general switch-off takes off.
