Zennio ALLinBOX 1612 v2, User Manual

Page: 23 / 52

ALLinBOX 161 / 88 / 46 / Hospitality
https://www.zennio.com Technical Support: https://support.zennio.com
23
valve, one or up to two on-off valves depending on the ALLinBOX and its
parameterisation), and the relays that set the fan speed level. The latter can be achieved
through relay accumulation (more relays closed means a higher fan speed) or through
relay commutation (one specific relay will be available per level), depending on the
configuration. The relays distribution for the valves control is shown in the following table
for every possible parameterisation and ALLinBOX type:
Fan
coil Numbe
r pipes
Valve
type
Output Action
ALLinBOX
1612 v2 88 46
1
4
On / Off
B2 Cooling Valve
  
C1 Heating Valve
  
Three-
point
B2
Opening Cooling
Valve
  
C1 Closing Cooling Valve
  
C2
Opening Heating
Valve
  
D1 Closing Heating Valve
  
2
On / Off B2
Cooling and/or
Heating Valve
  
Three-
point
B2
Opening Valve for
both modes
  
C1
Closing Valve for both
modes
  
2
4
On / Off
F2 Cooling Valve
  
G1 Heating Valve
  
Three-
point
F2
Opening Cooling
Valve
  
G1 Closing Cooling Valve
  
G2
Opening Heating
Valve

 
H1 Closing Heating Valve
  
2
On / Off F2
Cooling and/or
Heating Valve
  
Three-
point
F2
Opening Valve for
both modes
  
G1
Closing Valve for both
modes
  
Table 1. Actions performed by the binary outputs associated to the valve control depending on the
ALLinBOX.