Zenith Z-100 Series, User Manual

Page: 33 / 150

Page 32
WINCHESTER SUPPLEMENT
The PART Utitity
The Partition
Name
The cursor will be positioned over the first character of the
first partition's partition name in the table. The partition name
may be up to 16 characters in length and may contain any
printing character except the semicolon (;). The following are
all valid partition names:
CP/M~ C C O U N T ING
DATABASE
WO R D /PROCESSING
George
Spread-sheet
Z-DOSM C C O U N T ING
Thelma
BASIC
At this time, you may choose to change the partition name,
delete the partition, or leave it alone.
To change the partition's name, type the new name. If you
use lower case letters, they will be converted to upper case.
While entering the new name, you will see several things hap-
pen.
• Th e old partition name will be erased when you press the
• Th e ~g g gg ~ key w ill operate normally, moving one
character to the left and erasing the character under the
cursor. When you use the [ggKI g~~ key t o e rase
the first letter of the new name that you have typed, the
letter will be removed and the old partition name will reap-
pear.
first letter of the new name.