page 28
WINCHESTER SUPPLEMENT
The PART Utility
1 00/0
1000 0 / 0
Total Util i z at ion (Allocated/unallocatedj
Default boot
partition number.
B — !Nodify default boot parti t i o n
P — Partition
maintenance
E — Exit
Enter the
number of the default boot partition.
Figure 6
Entering a Default Boot Partition
When the cursor moves to the default boot partition number,
you will see the current partition number and name disappear.
You may now enter the number of the partition that you want
to be selected by the boot process. You will also see a prompt
to, "Enter the number of the default boot partition," at the bot-
tom of the screen.
Enter the number of the partition that you want to estab-
lish as the default boot partition, and press the g~
g g J
key. The number must be in the range 1 to 16 and have
a partition name established in the table. Once you enter
the number and press ~
!
Jgjg, the partition and system
names will be displayed between the angle brackets.
A disk that has just been prepared with the PREP utility
will be set up with two partitions. The default boot partition
will be set to 1 (Z-DOS). To change the default boot parti-
tion to partition 2 (CPM), enter:
Summary of Contents for Z-100 Series
