Zenith Z-100 Series, User Manual, Page: 26 / 150

page 25
WINCHESTER SUPPLEMENT
The PART Utility
CAUTION: The PART utility may destroy some of the informa-
tion that you have stored on your Winchester disk. Do not
use PART until you have transferred your existing Winchester
disk files to floppy disks.
If you have existing files on your Winchester disk that need
to be transferred to floppy disks, you should press the g
] key
to stop PART. Then use the appropriate utility (supplied with
your operating system) to back up the files on your Winchester
disk.
NOTE: You can use PART to select a different "default boot
partition" without destroying software or data. However, you
should not attempt to do this if you are unsure about the proce-
dure. To be safe, back up your important disk files first.
You may now use the following procedure if you are setting
up your Winchester disk for the first time, if you have backed
up all important files, or if the existing files on the Winchester
disk are unimportant.
To exit PART, press the g] key. The Z-DOS system
prompt will be displayed.
To continue with PART, press the Q key. The screen will
clear and you will see a display similar to that illustrated
in Figure 5.