Zenith Z-100 Series, User Manual

Page: 24 / 150

page 23
WINCHESTER SUPPLEMENT
The PART Utility
NOTE: The capacity of your Winchester disk is affected by
a number of factors that were discussed in the hardware sec-
tion of this supplement. Also affecting the total usable capacity
is the number of sectors that were locked out during the opera-
tion of the PREP utility.
FEATURES OF PART
The PART utility enables you to establish and/or change the
following:
• Th e name of each partition.
• Th e n ame of the operating system to be used with each
partition.
• Th e percent of disk space allocated to each partition.
• Th e n ame of the partition that is selected when you boot
your computer system.
PART OPERATION
In this part of the Winchester supplement, you will learn how
to use the PART utility. If you are going to establish several
new partitions or rearrange existing partitions, then you will
enter partition and operating system names and establish the
amount of disk space for each partition. If you are setting
up a new default boot drive, then you will only have to specify
the desired partition.
When you see the Z-DOS prompt on your screen as described
previously, you may start PART.