Zenith Z-100 Series, User Manual

Page: 30 / 150

page 29
WINCHESTER SUPPLEMENT
The PART Utility
and press the g~ g key. Y o ur screen will be similar
to that illustrated in Figure 7.
Default boot partition number: 2 <CPM;CPM
B — Modify default boot partition
P — Partition maintenance
R — Restore to o r i g i na l p a r t i t i o n s
E — Exit
Choose desired option, <B, P, R or E>
Figure 7
Display After Selecting a Default Boot Partition
If you try to enter a number for which there is no established
partition on the table, the Computer will simply not accept
your entry and the cursor will remain at the number position
u ntil you enter a valid number and press g~ g g .
To retain the current default boot partition number press the
g~ g g k e y . The number and names of the current default
boot partition will be redisplayed, and the cursor will move
to the "Choose desired option" prompt at the bottom of the
display as shown in Figure 7.