23
ENGLISH
SAFETY INFORMATION
■
Do not operate the unit in any way other than described in this manual. Failure to follow
the instructions within the manual will invalidate your warranty.
■
SAFETY FIRST! Do not install the display where it may obstruct the driver’s vision, impair
the performance of any of the vehicle’s operating systems or safety features, including
airbags, or impair the driver’s ability to safely operate the vehicle.
■
When using the system, make sure you are firmly secured by your seat belt to ensure
you do not accidentally hit your head on the screen during sudden braking or other
incidents. If you ever encounter an accident, injuries can be more severe if the seat belt
is not properly buckled.
■
Do not attempt to install or service your display by yourself. Installation or servicing
of the display by persons without experience in electronic equipment and automotive
accessories may be dangerous and could expose you to the risk of a electric shock or
other hazards.
■
Be careful not to drain the car battery while using the unit when the car engine is stopped.
To avoid draining the battery, it is suggested that the vehicle engine is always running
while using the unit.
■
Do not disassemble or alter the unit in any way. Failure to do so can cause damage to
the unit and invalid the warranty.
■
Never clean the surface of the screen with chemical solvent or corrosive detergent,
which may cause permanent damage to the TFT LCD screen.
■
Avoid installing the unit in exposure to direct sunlight or near hot air vent. Please note
that the normal working temperature of the unit is between –5 °C to +50 °C. If the
internal temperature of the vehicle is extremely high, a short cooling down period is
necessary before operating the unit.
■
If the temperature inside the car is very low and the monitor is used soon after
switching on the heater, moisture may form on the panel or inside the unit. Turn off the
unit immediately! Failure to do so may cause the internal components to short circuit.
Allow the unit to rest for about one hour to allow the condensation to disappear before
continuing operation.
■
In extremely cold temperatures, the movement of the picture may be slow and the picture
may be dark. This is not a malfunction. The unit will work normally once it reaches its
operating temperature.
■
Do not drop or hit the LCD panel with a hard object, as it may cause permanent damage
to the LCD panel. Should LCD panel break, avoid touching glass and fluid. If do, please
clean with plenty of water and ask for medical attention immediately.
■
Due to different car specifications, please kindly ensure that the display of your monitor
is properly located and not obstructing the air-conditioning vent.
■
Avoid inserting any foreign objects into the slot of the disc player. Inserting coins or
other small objects may cause malfunction due to the precise mechanism of this unit.
■
Protect your disc. When you leave the car, be sure to eject the disc from this unit and
store it separately away from direct sun light.
■
Heat and humidity may damage the disc and you may not be able to play it again.
■
Use the supplied screws to fix the monitor metal mounting plate.
ZE-MR902-DVD Manual D+E.indd 23
13.09.2006 14:34:23 Uhr
