39
ZVC020ZQ-001_v01
Technical parameters
The vacuum cleaner type and technical parameters are
indicated on the rating label.
Noise level: 81 dB/A.
Electrostatics
Vacuuming some surface types in low humidity conditions
may cause the appliance to become charged with static. It is
a natural phenomenon, it does not damage the appliance
and it is not its defect.
In order to minimize this effect, it is recommended to:
●
increase the humidity in the room,
●
use general anti-static agents.
Appliance elements
A
1
ON/OFF button
2
Handle
3
Handle release button
4
Vacuum cleaner housing
5
Hand vacuum cleaner
6
Electrobrush release button
7
Dust container release button
8
Operation indicator
9
Electrobrush
10
Charging station with clip for attaching vacuum cleaner
11
Charging station base
12
Hand vacuum cleaner housing
13
Hand vacuum cleaner release button
14
Hand vacuum cleaner ON/OFF button
15
3 in 1 brush
A
Brush – attachment for small nozzle
B
Small nozzle
C
Crevice nozzle
16
CYCLONE module (fitted in the dust container)
17
EPA E10 Primary filter (fitted in the dust container)
18
Pre-filter (fitted in the dust container)
19
Dust container (fitted in the vacuum cleaner)
20
Plug and power cord
Assembling – preparing the vacuum
cleaner for operation
1
Open the vacuum cleaner handle.
2
Connect the vacuum cleaner housing with the
electrobrush.
3
Connect the charging station with the base.
4
Place the housing of the vacuum cleaner with the
electrobrush on the charging station. In order to do so, put
the clip of the vacuum cleaner housing onto the charging
station fastening hook.
B
5
Place the hand vacuum cleaner on the vacuum cleaner
housing. In order to do so, insert the inlet of the hand
vacuum cleaner into the air inlet, and press the housing
of the hand vacuum cleaner to the housing of the vacuum
cleaner. Characteristic clicking sound indicates the correct
installation of the hand vacuum cleaner.
6
In order to start vacuuming, remove the vacuum cleaner
from the charging station and press the “ON/OFF” button.
VACUUMING WITH THE HAND VACUUM CLEANER
1
Remove the hand vacuum cleaner from the housing by
pressing the release button.
2
The hand cleaner can be used separately or with the
accessories included.
3
Switch on the hand vacuum cleaner by pressing the “ON/
OFF” button. The “ON” indicator will light up.
●
When finished working with the hand vacuum cleaner
switch it off by pressing the “ON/OFF” button. In order
to place the hand vacuum cleaner on the housing, insert
the inlet of the hand vacuum cleaner into the air inlet,
and press the housing of the hand vacuum cleaner to the
housing of the vacuum cleaner.
Vacuum cleaner accessories
ELECTROBRUSH
8
Electrobrush is used to clean short hair carpets, carpet
floorings, floors or tiles. With the rotary brush it has the ability
to remove old and stubborn dirt, and difficult-to-remove dirt
such as threads, rags, paper, etc.
It is practically useful in households with pets, where
removing the animal hair from the carpets and floorings is
very onerous.
Do not use the electrobrush on long hair
carpets. When used on this type of carpet for
a longer time, protection will activate and the
electrobrush will switch off automatically. This
is normal feature and protects the electrobrush
from damage. To switch on the device again,
wait for a few minutes.
If the electrobrush comes in contact e.g. with
a hand, protection feature will automatically
switch off the brush in order to avoid injury.
3 IN 1 BRUSH
14
3 in 1 brush consists of a crevice nozzle, small nozzle and
brush - attachment for the small nozzle. The accessories can
be used to:
●
Crevice nozzle is used for cleaning: corners, stairs,
keyboards and other hard to reach recesses.
●
Small nozzle is used for vacuuming sofas, couches,
beds, etc.
C
Summary of Contents for zvc020zq
