Zelmer ZSVC825 WOJTEK, User Manual

Page: 9 / 37

17
16
PL PL EN EN
The adaptor cable cannot be replaced.
If the cable is damaged, the adaptor will be discarded.
WARNING: For the purpose of recharging the battery,
only use the detachable supply unit provided with this
appliance.
This symbol means that the appliance is intended
to be supplied from a detachable supply unit.
The appliances contains batteries that are only replaceable
by skilled persons.
This appliance contains batteries that are not replaceable.
Plug must be removed from socket-outlet before cleaning
or maintaining the appliance.
Follow the charging the product instructions in order to
charge it.
Due to the plastic housing of the vacuum cleaner, keep
the appliance away from all heat sources (radiators,
stoves, etc.).
Do not block the vacuum cleaner inlet and outlet openings!
Turn off the vacuum cleaner before replacing equipment.
This appliance is intended for use at a maximum altitude
of 2000m above sea level.
IMPORTANT WARNINGS
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not pull on the connection cord in order to unplug it.
Do not use, connect or disconnect the device to the mains with your hands or feet wet.
Proceed according to the conservation and cleaning section of this manual for cleaning.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact an
authorised Technical support service.
In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from the
brand´s Official Technical support service may carry out repairs or procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null and void. Only an
authorised technical support service centre may carry out repairs on this product.
This appliance is designed exclusively for domestic use, in no case should be a commercial or industrial
use. In case of misuse or tampering with the product, it will be out of warranty.
Do not use the appliance to vacuum liquids (water, etc), sharp objects (pins, pins, nails, glass, etc),
incandescent objects (matches, cigarettes).
Never use the turbobrush to: Polish floors, suck (Liquids, wet or damp dust, hot ash, burning objects, such
as cigarettes, matches, sharp and hard items, such us: razors, pins, thumbtacks, pieces of glass, etc), flour,
cement, plaster, printer or photocopier toner, etc.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the
non-observance of these warnings.
INSTRUCTION OF USE
Wall Mounting
The vacuum cannot stand on its own. Make sure it is mounted securely.
Attach the handle as shown in Fig. 1A or Fig.1B (Do not stick to rough or uneven surface like brick, porous
aluminum or stucco surfaces.)
Attach the bracket at the height of 107cm / 3.5ft (Fig. 2)
Assembling
Attach your desired cleaning accessory to the metal tube or main unit of the vacuum as illustrated (FIG.3)
Operating guide
On/off button: press it to power on or power off this vacuum cleaner.
Switch among power levels: press button of ‘+’ to increase vacuum suction, press button of ‘-‘ to decrease
vacuum suction.
Indication of instant energy volume: may show instant energy volume during both vacuum working and
whole process of battery charging.
SUPER power level
STANDARD power level
ECO power level
Charge your vacuum
The vacuum is powered by the built-in lithium battery. Before firsy use, charge the battery for at least
3,5hours.
You can charge the battery in two ways. Method 1 (FIG.4), method 2 (FIG.5)
Notes:
The vacuum cannot work while charging
The power indicator(s) is(are) flashing during charging and stay white when fully charged.
The power indicators flash when the battery is low
The vacuum cannot be charged when the ambient temperature is below 10°C/50°F or above 45°C/113°F