Zelmer SANO ZJE4800, User Manual

Page: 8 / 43

15
14
PL PL EN EN
JUICING TIPS
• Choose fresh fruit and vegetables such as pear, grape, melon (watermelon, cantaloupe), celery sticks,
beetroot, carrot, etc. They contain more juice.
• You need to peel off the thick skin of pineapple, cantaloupe and raw beetroot.
• The seeds of citrus fruit will make juice taste bitter and it is recommended to eliminate them
• The amount and taste of apple juice depends on the type and freshness of apples
• Freshly squeezed apple juice quickly turns brown, which is a normal oxidation phenomenon. Add a few
drops of lemon juice to slow the oxidation process
• Fruit that contain starch such as bananas, papaya, avocado, figs, peaches and mangos are not suitable
for juicing in juicers.
MAINTENANCE
Please clean the product timely after use. Before cleaning the product make sure to turn off
the switch and disconnect the product from the power supply. Please wipe the main body with wet
cloth. Do not rinse or soak with water to avoid leakage or device damage.
This product should be stored in a dry place and with no direct exposure to UV. Before storing the
product, make sure it is clean and dry.
Follow the steps below to remove and clean the juice function component:
1. Take out pushing rod, open the left/right buckle
2. Take down the top part, sieve, pulp container and so on
3. Add detergent in clear water, clean sieve with cleaning brush, rinse clean with water. The other remov-
able components are cleaned with a sponge or a wet cloth. Use warm water (temperature less than 60°C)
adding a few drops of dishwashing detergent to make the cleaning effect better.
PRODUCT SAFETY INDICATORS
Rated voltage 220-240V~
Rated power 600W
Rated frequency 50Hz
Juice function of continuous working time ≤2 minutes
The product is class II electric appliance, no need for additional grounding device.
Please pay attention to check whether the sieve is damaged before use or after use. If there is any
damage, please stop using the sieve and immediately contact the customer service department of
our company. Do not perform repairs by yourself.
5. Turn the juice outlet downwards and place the juice container provided or other container parallel to the
outlet
6. Put the inlet protective cover in its position
7. Put the pusher in the inlet
8. Wash the ingredients and cut into the size of the inlet
9. Turn on the power, turn the switch to the appropriate gear. Then the product starts work. The
working time is less than 2 minutes.
Please make sure the switch is off before turning on the power.
Please first remove hard seeds, thick skin or hard shell from the ingredients.
10. Put the prepared ingredients into the feeding inlet and gently push the fruit and vegetable
pieces with the push rod. Do not push too hard, so as not to affect the juicing effect
11. When food processing ends, when no more juice flows out, close the switch, cut off the power, wait until
motor and sieve stop and there is no more juice
Take juice container to drink the juice. If the pulp container or juice container is full, disconnect the power
supply and clean the pulp and container. It is recommended that juice should be drunk immediately. Expo-
sure to air for long periods of time affects the taste and nutritional value.