Zelmer SANO ZJE4800 User Manual Download

Page: 7 / 43

8. If the machine is not used for a long time, to prevent damage caused by short circuit, please turn off the

switch and disconnect the power
9. Please clean it in time after using. Be careful in removing and cleaning removable parts, so as to avoid

injury or damage to accessories
10. Do not use any steel wool, abrasive cleaner or corrosive liquid (e.g. gasoline or acetone) to clean the

product
11. Hard seeds, thick skin or hard shell on fruit and vegetables must be removed before processing. The

parts and materials in contact with food are food grade certified, clean, hygienic and reliable
12. This product is not suitable for pressing sugarcane and ginger, etc., as this kind of material may easily

jam the product and cause abnormal vibration, etc., which can damage the product or its parts and affect

the life of the product
13. The operating speed of each gear of this product has been set to its optimal state and it is no need to

adjust it
14. This product is for household use only and must be used in accordance with the instructions in this

manual. It shall not be used for other purposes.

USING METHODS

Thoroughly clean the parts in contact with food before using the product for the first time, (refer to

“Chapter 4: Maintenance”).
The knob switch:

1. “0”: off / stop
2. “1”: low rotate speed for squeezing juice from soft fruit and vegetables such as

watermelon, tomatoes, cucumbers and strawberries etc.
3. “2”: high speed. Suitable for juicing hard fruit and vegetables such as carrot,

beetroot, apples, etc.

SFor detailed instructions on the selection of ingredients, please refer to the second point of the

“Using methods”.

INSTRUCTIONS FOR USE

This product has a double safety system. It starts working only after all parts are properly installed.
Please follow these steps when installing and using the product:
1. Remove the power cord and place it behind the machine.
2. Install the pulp container on the main body; Put the sieve into the pulp container ensuring that it is in-

stalled properly on the connecting head.
3. Install the top cover to the main body and ensure that the cover is in place.
4. Fit into two corresponding grooves and push down the connectors until a click indicates that the installa-

tion is in place otherwise the product will not work.

1. Please wipe the main body with wet cloth. Do not rinse or soak with water, so as to prevent leakage or

damage of electrical elements
2. It is strictly forbidden to use items other than the pushing rod in the feeding inlet while the product is

working, as it may cause damage to the product
3. It is strictly forbidden to contact the sieve, motor and other movable parts when working, so as to avoid

personal injury
4. It is prohibited to use overheated food (≥60°C) so as to avoid parts getting broken, splash burns
5. Please do not pull the plug with wet hand as it may cause electric shock
6. Please do not place the product close to sources of high temperature, strong magnetic field, flammable

and explosive gas (such as natural gas, biogas, etc.) as it may cause damage, failure or fire
7. It is strictly forbidden to put product parts into an alexipharmic ark, dishwasher and clean them in hot

water of more than 60°C in order to avoid damage resulting from heat deformation
8. It is strictly forbidden to keep eyes near the feeding inlet when the product is working as it may result in

accidents.

ATTENTION

The input voltage of this product is 220-240V ~ 50Hz, please check if it is in accordance with the

local power supply voltage, before connecting the product to the power supply, as too high or too

low voltage can damage the components.
This product is type Y link. If the power cord is damaged, it must be replaced by the professional

staff of the manufacturer, the maintenance department or similar departments. Do not disassemble

to perform any repairs so as to avoid danger.

1. Before use, please check whether the power cord, plug, knife, cover and other parts are not damaged. If

any damage is found, please stop using the product immediately and do not hesitate to contact our custom-

er service department to avoid danger. Please do not repair or interfere in the product by yourself
2. In the process of use, if you find that the blade is broken, please stop using the product immediately and

contact the customer service department of our company at once so as to avoid danger. Do not disassem-

ble to perform repairs by yourself
3. Please do not operate this product on tilting or unstable surface or carpet, towel, etc., so as to avoid

accident or damage to the product
4. Before connecting the power supply, please make sure that the removable parts are installed in place so

as to avoid abnormal operation of the product
5. Please strictly comply with the rated operating time. Juicing function continuous operation must not

exceed 2 minutes, cooling should take place after 2 minutes of processing. After 2 minutes as a cycle and

continuous work in 3 cycles, the product must stop for 15 to 20 minutes. Wait for motor to cool before

working again. This method is best to extend the life of the product
6. If the product stops working in the process of operation, it may be caused by the temperature control

protection of the motor. Please turn off the power and then use the product after 20-30 minutes of cooling
7. After processing, please stop the blade motor and cut off power. Then remove the juicer removable parts,

sharp blade. Disassembly should be careful to avoid injury. You can wear protective gloves