Zektor HDA604 User Manual Download Page 4

Page: 4 / 84

Switch User Guide, Version 0.16, 5/13/16

Version History

Version 0.11 12-03-2015

•

Added a better description of how to switch into the XIO mode to the SZ, DSZ, and HSZ com-
mand definitions.

Version 0.10

12-01-2015

•

Added a “Paging Overview” section.

•

Added a wiring diagram and description of using the back panel paging triggers.

•

Added a description of the ‘pDSW’ command.

Version 0.9

09-29-2015

•

Added “Bit-12” to the SS and FS commands to save and reset paging parameters.

Version 0.8

08-19-2015

•

Fixed source descriptions in the DSZ command.

•

Fixed the description of the ‘pTIME’ command.

•

Fixed some typos.

Version 0.7

05-26-2015

•

Added paging description.

•

Added XIO flag (Extended I/O) in the ‘XS’ command.

•

Changed the numbering to reflect the Extended I/O values.

Version 0.6

05-14-2015

•

Fixed some typos.

Version 0.5

02-13-2015

•

Beta release.

Summary of Contents for HDA604





















































































Search results

Summary of Contents for HDA604

Reviews:

Related manuals for HDA604

Brands by name

Popular brands

Zektor HDA604, User Manual

Search results

Summary of Contents for HDA604

Reviews:

Related manuals for HDA604

Brands by name

Popular brands