Zektor Switch Serial Protocol, Version 0.16, 5/13/16
39
Overview
would mirror analog output 17 on coax output 19, and the command:
^DSZ @35,129$
would mirror analog output 33 on coax output 35.
Example Palladia8x8
Assuming you have one of our Palladia8x8 HDMI/Audio switch, setting the Extended I/O mode will
change the source numbers as follows:
The Analog switch section:
0
= Disconnect HDMI audio from any source (mutes audio).
1-9
= Select analog inputs 1-16.
10-32
= These will mute audio. There are only 8 analog inputs on the Palladia8x8.
33-41
= Select coax inputs labeled 10-18 on the back of the switch.
42-64
= These will mute audio. There are only 9 coax inputs on the Palladia8x8.
65-73
= Select optical inputs labeled 19-27 on the back of the switch.
74-96
= These will mute audio. There are only 9 optical inputs on the Palladia8x8.
97-104
= Extract audio from HDMI inputs 1-8.
105-112
= Mute audio, there are only 8 HDMI inputs on the Palladia8x8.
113-120
= Extract audio from the HDMI outputs.
121-128
= Mute audio, there are only 8 HDMI inputs on the Palladia8x8.
The HDMI switch section:
0
= Disconnect HDMI audio from any source (blanks video).
1-8
= Select HDMI inputs 1-8.
9-16
= These will blank the video, there are only 8 HDMI inputs on the Palladia8x8.
