OPERATION
Carl Zeiss
Core accessories
Stemi DV4 / DR
3-18
B 40-003 e 08/00
•
Move the microhead camera in the eyepiece adapter axially to focus the image on the connected
monitor.
•
Tighten clamping screw (SW 1.5 mm) on the eyepiece adapter and check the focus. If required,
repeat the procedure.
•
Turn the eyepiece adapter in the eyepiece tube to align the camera image until the image on the
monitor is upright and unreversed.
•
Tighten retainer ring of the eyepiece adapter and check the setting; if required, repeat the procedure.
3.2.3.7
Eyepiece insertion camera
•
Unscrew eyepiece (3-21/
5
) from one of the
eyepiece tubes.
•
Insert eyepiece adapter 0.8x (3-21/
3
) into the
eyepiece tube and tighten the retainer ring
(3-21/
4
).
•
Insert dia. 30 mm or dia. 23.2 mm eyepiece
insertion camera (3-21/
1
) into the mounting
tube of the eyepiece adapter via the adapter for
dia. 30 mm eyepieces (3-21/
2
) and align the
image position.
Fig. 3-21
Attachment of insertion camera
Summary of Contents for Stemi DR 1040
Page 1: ...Stereomicroscopes Stemi DV4 Stemi DV4 SPOT Stemi DR 1040 Stemi DR 1663 Operating Instructions...
Page 6: ...ILLUSTRATIONS Carl Zeiss Stemi DV4 DR 0 6 B 40 003 e 08 00...
Page 10: ...INTRODUCTION Carl Zeiss Stemi DV4 DR 1 4 B 40 003 e 08 00...
Page 18: ...DESCRIPTION Carl Zeiss Stemi DV4 DR 2 8 B 40 003 e 08 00...