OPERATION
Stemi DV4 / DR
Basic instrument as compact version with stand C
Carl Zeiss
B 40-003 e 08/00
3-1
3
OPERATION
3.1
Basic instrument as compact version with stand C
3.1.1
Start-up
•
Open the packaging on the top.
•
Pull the Stemi DV4 / DR and the expanded
plastic inset out of the packaging in upward
direction and place it on the table.
•
Remove the semi-shell which is pointing
upwards.
•
Check whether all the components listed in the
delivery note are included in the package.
•
Properly dispose of the packaging or keep it for
later reuse.
•
Place stand base plate of the stereomicroscope
on a flat, stable support.
•
Remove small cardboard box containing the
power supply unit and unpack it.
•
Insert primary adapter (corresponding to the
local line voltage) into the appropriate opening
of the power unit until stop.
☞
Voltage change on the power unit is
not required. It is automatically
matched to the available line voltage.
•
Insert connector of the power unit into the
12 V socket in the rear left of the stand base
plate.
•
Connect power unit directly to the line.
The blue power pilot lamp (LED) of the illumination control on the right of the stand base plate lights up.
The instrument is in the standby mode.
☞
The packaging cover can be used as dust cover.
Fig. 3-1
Installation and mains connection
of the Stemi DV4 / DR
Summary of Contents for Stemi DR 1040
Page 1: ...Stereomicroscopes Stemi DV4 Stemi DV4 SPOT Stemi DR 1040 Stemi DR 1663 Operating Instructions...
Page 6: ...ILLUSTRATIONS Carl Zeiss Stemi DV4 DR 0 6 B 40 003 e 08 00...
Page 10: ...INTRODUCTION Carl Zeiss Stemi DV4 DR 1 4 B 40 003 e 08 00...
Page 18: ...DESCRIPTION Carl Zeiss Stemi DV4 DR 2 8 B 40 003 e 08 00...
