OPERATION
Carl Zeiss
Core accessories
Stemi DV4 / DR
3-14
B 40-003 e 08/00
☞
When taking photos in transmitted light with a lamp voltage close to U
max
(blue LED of the
illumination control is blinking!), remember that the lamp voltage is reduced to constant
voltage after three minutes!
•
For the operation of the camera, see the operating manual "SONY Digital Handycam DCR-PC100"!
3.2.3.3
SONY camera "Digital Still Camera
Cybershot DSC-F505"
•
Use the angled screwdriver to loosen the set
screw (3-17/
3
) on the eyepiece adapter.
•
Pull out the lens mount (3-17/
4
).
•
Unscrew eyepiece (3-17/
5
) from one of the
eyepiece tubes.
•
Screw lens mount (3-17/
4
, optical surface
pointing to the observer) onto the thread of the
eyepiece tube and tighten the screw until stop.
Caution! Do not touch the optics!
•
Screw sliding mount with thread M52 (3-17/
2
)
into the M52 objective/filter thread of the DSC-
F505 camera (3-17/
1
) until stop.
•
Attach sliding mount (3-17/
2
) with camera
(3-17/
1
) to the lens mount (3-17/
4
), orient it
and use angled screwdriver to tighten the set
screw (3-17/
3
).
•
Connect supply and signal cables, if required. If
the camera will be used for a long period of
time, it is recommended to use the line adapter
which is enclosed with the camera!
•
Switch on the camera.
•
Switch Autofocus to manual focusing (the symbols
F
,
or
are displayed).
•
Set camera lens manually to
∞
via the focusing ring: the symbol
must be displayed.
Caution!
It is possible that the "
∞
" setting is slightly moved when the adapter is manipulated or the
camera zoom operated. Therefore: always check the "
∞
" setting before taking exposures!
•
Move zoom camera lens into the center zoom position (display:
W
T
).
•
Move camera lens into the "W" or "T" direction until the image is untrimmed and homogeneously
illuminated and until the required magnification has been reached.
Fig. 3-17
Attachment of SONY camera
"Digital Still Camera Cybershot DSC-
F505"
Summary of Contents for Stemi DR 1040
Page 1: ...Stereomicroscopes Stemi DV4 Stemi DV4 SPOT Stemi DR 1040 Stemi DR 1663 Operating Instructions...
Page 6: ...ILLUSTRATIONS Carl Zeiss Stemi DV4 DR 0 6 B 40 003 e 08 00...
Page 10: ...INTRODUCTION Carl Zeiss Stemi DV4 DR 1 4 B 40 003 e 08 00...
Page 18: ...DESCRIPTION Carl Zeiss Stemi DV4 DR 2 8 B 40 003 e 08 00...
