OPERATION
Stemi DV4 / DR
Core accessories
Carl Zeiss
B 40-003 e 08/00
3-17
3.2.3.5
Video camera with C-Mount
connector
•
Unscrew eyepiece (3-19/
4
) from one of the
eyepiece tubes.
•
Screw eyepiece adapter C-0.8x (3-19/
2
) into the
video camera (3-19/
1
).
•
Insert complete unit into the eyepiece tube until
stop and slightly tighten the retainer ring
(3-19/
3
) of the eyepiece adapter.
•
Align the camera and tighten the retainer ring.
3.2.3.6
Microhead camera
•
Unscrew eyepiece (3-20/
4
) from one of the
eyepiece tubes.
•
Insert microhead camera (JAI CV-M2200 PAL,
3-20/
1
) into the eyepiece adapter for the
microhead camera and use angled screwdriver
to slightly tighten the clamping screw (3-20/
2
).
•
Insert eyepiece adapter into the eyepiece tube
until stop and slightly tighten the retainer ring
(3-20/
3
).
•
Connect the microhead camera to the Control
Unit and the monitor.
•
Switch on the microscope illuminator and the
video system.
•
Place an object on the stage. Make the basic
settings on the Stemi DV4 / DR (see page 3-5).
After this, the focusing knob must no longer be
adjusted.
•
Set minimum magnification.
Fig. 3-19
Attachment of video camera with
C-Mount connector
Fig. 3-20
Attachment of microhead camera
Summary of Contents for Stemi DR 1040
Page 1: ...Stereomicroscopes Stemi DV4 Stemi DV4 SPOT Stemi DR 1040 Stemi DR 1663 Operating Instructions...
Page 6: ...ILLUSTRATIONS Carl Zeiss Stemi DV4 DR 0 6 B 40 003 e 08 00...
Page 10: ...INTRODUCTION Carl Zeiss Stemi DV4 DR 1 4 B 40 003 e 08 00...
Page 18: ...DESCRIPTION Carl Zeiss Stemi DV4 DR 2 8 B 40 003 e 08 00...
