Zeiss PLEX Elite 9000, Instructions For Use Manual

Page: 95 / 246

Instructions for Use 8 Operation
2660021169042 Rev. A 2018-03 8.5 Acquire Data (Scan)
2660021169042 Rev. A 2018-03 95 / 246
8 9
10
11
12 14
15
13
18
16
17
19
8. To adjust image brightness or make other fine adjustments for
any viewport, click the corresponding Fine Adjustment (8)
tool and make adjustments. (B-Scan viewport indicated.)
9. To adjust B-scan (9) image quality, fine-tune Enhance (10)
(polarization) settings.
10. To adjust B-scan (9) image centering, fine-tune Center (11) (Z-
offset) settings.
11. To turn on FastTrac , click FastTrac (12) .
NOTE! If the capture button is outlined in red, Capture is
disabled. If Capture is disabled, turn off FastTrac and
ensure that the Capture is enabled (outlined in green).
ð
The FastTrac icon turns green to indicate that it's on.
12. To disable EDI , uncheck EDI (13) .
13. To reset the scan pattern, click Reset (14) .
14. To recenter the fixation target, click Recenter (15) .
15. Click Capture (16) .
ð
The instrument acquires the first component scan in the
series.
ð
A checkmark and retake icon (17) appear next to the
scan letter.
ð
The instrument moves into place for the next scan.
ð
The fixation target moves to the next component scan's
position.
16. Repeat the adjustments steps described above for each
component scan in the montage series.