Zeiss PLEX Elite 9000, Instructions For Use Manual

Page: 222 / 246

17 Accessories and User Replaceable Spare Parts Instructions for Use
2660021169042 Rev. A 2018-03 17.3 Returning Defective Parts
222 / 246 2660021169042 Rev. A 2018-03
17.3 Returning Defective Parts
The return of defective parts is a very important part of ZEISS'
responsibility to its customers and helps us to:
Action
u
Evaluate returned parts to assist in root cause analysis.
u
Rebuild and return them to service stock, so they are available
in the future as needed.
17.4 Equipment Return Authorization
Authorization must be obtained from Carl Zeiss Meditec before
equipment is returned for repair. A Return Material Authorization
(RMA) number is required on each return shipment to Carl Zeiss
Meditec. The procedure for obtaining an RMA number varies,
depending on your area of operation. Use the procedure that has
been established by Carl Zeiss Meditec for your area of operations.
17.5 International Service Operations
Customers are billed for shipping charges, including any customs
fees required.
For International Service Operations, please use the ordering proce-
dures that have been established for your area of operations, and
which meet the requirements of the Carl Zeiss Meditec Interna-
tional Parts Department.
17.6 Part Numbers
NOTE
Part numbers are subject to change
u
When ordering, confirm all part numbers with your ZEISS
Representative.
17.6.1 Power Cords
Designation Specification Part Number
Power Cord IEC 320 1 m/39 Inch 0000001217033
Power Cord IEC 320 to
NEMA .3 m/12 In 2660021115973
Power Cord 90 LH IEC
320 6A 250V .91 m/36 In 0000001074100
Power Cord Hosp Grd
Grey Rt. Angle 3 m/10 ft 2660100014449
Power Cord Jumper
IEC321 6A 2 m/78.75 in 0000001235144