Zeiss MMZ M, Operating Instructions Manual

Page: 58 / 154

Control and operation
3-14
61211-1270302 MMZ M
bypass: Bypass collision protection (interruption of the light
beams).
For moving the CMM clear after a collision. The yel-
low indicator lamp is lit, and a signal tone is heard.
NOTICE! When moving the CMM in the
wrong direction, it can be seriously damaged.
Make sure to move the joystick on the control con-
sole in the right direction. Also ensure that the op-
erating position has been properly set on the con-
trol console.
Key-operated switch for coupling
If a loading device is used, the controllers of the loading device and the
CMM are coupled to each other. In some cases, decoupling is necessary
to allow moving the CMM manually. The key-operated switch labeled
service mode is used for decoupling of the two controllers.
Functions assigned to the switch positions:
0 The controllers of the CMM and of the loading device are coupled
to each other.
1 Coupling between CMM and loading device is disabled; the CMM
can be moved
NOTE
The switch remains in position «1». After moving the CMM, turn the
switch back to «0».
Operation
BP26SE control console
Standard
The CMM comes standard with the following control console.