Zeiss Axioskop 2 plus Operating Manual Download Page 8

Page: 8 / 138

INTRODUCTION

Axioskop

plus

Carl Zeiss

Notes on instrument safety

Axioskop 2

mot plus

0-8

B 40-075 e 10/03

Notes on instrument safety

The Axioskop 2

plus

and Axioskop 2

mot plus

microscopes have been designed produced and tested in

compliance with DIN 61010-1 (IEC 1010-1) and DIN EN 61010-2-101 safety requirements for electrical
measuring, control and laboratory instruments.

They meet the requirements of the directive 98/79/EC and are marked with the

marking.

This operation manual includes information and warnings which must be observed by the user.

The following warning and information symbols are used in this manual:

☞

NOTE

This symbol is a warning which you must observe under all circumstances.

CAUTION

This symbol is a warning which indicates a hazard to the instrument or instrument system

CAUTION

This symbol is a warning which indicates a hazard to the user of the instrument

CAUTION

Hot surface

CAUTION

UV radiation is emitted

CAUTION

Disconnect the instrument from the line before opening it!

Summary of Contents for Axioskop 2 plus











































































































































Search results

Summary of Contents for Axioskop 2 plus

Reviews:

Related manuals for Axioskop 2 plus

Brands by name

Popular brands

Zeiss Axioskop 2 plus, Operating Manual

Search results

Summary of Contents for Axioskop 2 plus

Reviews:

Related manuals for Axioskop 2 plus

Brands by name

Popular brands