Zeiss Axioskop 2 plus Operating Manual Download Page 59

Page: 59 / 138

Axioskop 2

plus

START-UP

Axioskop 2

mot plus

Attachments and conversions

Carl Zeiss

B 40-075 e 10/03

2-27

2.2.12

Attachment of adapter for the
Axioskop 2

plus

The adapter for the Axioskop 2

plus

is used to

attach intermediate tubes and/or tubes of

the Axioplan 2 to the Axioskop

plus

/ Axio-

skop 2

mot plus

•

Use SW 3 ball-headed screwdriver to loosen
clamping screw (2-41/

) and remove available

tube of the Axioskop 2

plus

in an upward

direction.

•

Insert dovetail of the adapter for the
Axioskop 2

plus

(2-41/

) in the stand opening

(2-41/

) on the underside and slightly tighten

clamping screw (2-41/

•

Insert fixation screw (2-41/

) in countersunk

hole of the adapter (2-41/

) and screw it into

the drilled hole (2-41/

) on the stand.

•

Tighten clamping screw (2-41/

) and fixation

screw (2-41/

•

Attach required intermediate tube and/or tube (2-41/

) of the Axioplan 2 to the adapter and clamp it

using screw (2-41/

) (also see the Axioplan 2 manual).

•

Insert eyepieces with field number 23 into the Axioplan 2 tube (2-41/

Fig. 2-41

Attachment of adapter for the
Axioskop 2

plus

Summary of Contents for Axioskop 2 plus











































































































































Search results

Summary of Contents for Axioskop 2 plus

Reviews:

Zeiss Axioskop 2 plus, Operating Manual, Page: 59 / 138

Search results

Summary of Contents for Axioskop 2 plus

Reviews: